Stopwatch for timing activities

Time an activity and compare laps without setting a duration before you start.

00:00:00.0

Recorded laps

Each row shows the lap time and cumulative total. Up to 100 laps per timing session.

    Your laps will appear here after you record the first one.

    Keep the page open. Reloading, leaving or changing language clears the time and laps. Background tabs may update late.

    When to use stopwatch for timing activities

    Use the stopwatch to find out how long an activity takes: a presentation, an exercise, reading or a work stage. You do not need to know the duration before starting.

    How to use

    Click Start. Record lap saves an interval without stopping the clock. Pause freezes the time; Resume continues without including the pause. Reset clears the time and laps.

    How the timing works

    The elapsed time adds only intervals when the stopwatch is running. Each lap row shows the time since the previous lap followed by the cumulative total, separated by a slash. The display shows tenths of a second.

    Worked example

    You record a lap at 30 seconds and another at 55 seconds. The first row shows a 30-second lap and 30-second total; the second shows a 25-second lap and 55-second total. A 10-second pause between laps is excluded.

    Limitations and precautions

    Laps stay only on this page, up to 100 per timing session. Closing, reloading or changing language clears everything. Timing uses the device clock, which may change; it does not replace a certified timing instrument. Background tabs may update late.

    Frequently asked question

    What is the difference between a stopwatch and a timer?

    A stopwatch starts at zero and measures elapsed time. A timer starts at a chosen duration and counts down to zero. Choose the timer for an alert when an interval ends.

    Comparing laps without confusing split and total

    If you mark one lap at 00:30 and another at 01:10, the splits are 30 and 40 seconds; the total remains 70 seconds. Use splits to compare repetitions of the same task. Pausing stops measurement: paused time is excluded from the total. Reloading clears the laps, so note the results before leaving.

    If you already know how long you want to count, use Countdown timer.

    Continue with Countdown timer or read how the tools work.