Understand the experiment
Imagine a clock crossing a laboratory at constant speed. Two events happen at that clock: the start and end of measurement. Proper time is its own measured interval; the laboratory assigns another interval to those same events.
Where does time dilation come from?
In 1905, Albert Einstein introduced special relativity in the context of tensions between mechanics and electromagnetism. Earlier work by Lorentz and others had already explored how to relate measurements in motion. The theory replaces a universal time with measurements of space and time that depend on the reference frame.
The explanation starts with two postulates: physical laws have the same form in all inertial frames, and light in vacuum has the same speed c in those frames. To make both statements consistent, observers in relative motion need not agree on the duration between events.
Reference frame, event and proper time
An event happens at a location and a time, such as starting or ending a measurement on a clock. A reference frame assigns positions and times to events. Here the laboratory is an ideal inertial frame, without rotation or acceleration. The clock passes through it in a straight line at constant speed.
We choose two events on the moving clock’s path. In that clock’s frame they happen at the same place: its recorded interval is proper time Δτ. In the laboratory they occur at different positions; Δt is assigned by an ideal network of synchronised clocks. The laboratory clock drawing summarises this interval rather than a single clock present at both locations.
Dictionary of formula symbols
Both intervals must use the same units. The tool accepts hours and also displays results in minutes. β and γ are ratios: they are not speeds, hours or percentages.
- Δ (delta)
- Indicates a difference. Δt is the final time minus the initial time, rather than a single clock reading.
- Δt
- Interval between the two events assigned by the laboratory. This is the value you enter in hours.
- Δτ
- Proper time: interval recorded by the clock accompanying both events. τ is read tau.
- v
- Relative speed between the clock and the laboratory, constant in this model.
- c
- Speed of light in vacuum: exactly 299,792,458 m/s, or 299,792.458 km/s.
- β (beta)
- Dimensionless ratio v/c. β = 0.8 means v = 0.8 c. Use the same units for v and c.
- γ (gamma)
- Lorentz factor: γ = 1/√(1 − β²) = Δt/Δτ. Compares the intervals and has no units.
- L
- Distance between the mirrors in the thought experiment below, perpendicular to the direction of motion.
Derivation with a light clock
Imagine two parallel mirrors separated by L. A pulse travels from one to the other and back. Emission and return to the starting mirror define two events at the same place in the clock’s frame. For someone accompanying the mirrors, the outward leg takes Δτ/2 and L = cΔτ/2.
In the laboratory the assembly moves horizontally. Light must reach the moving mirror and follows a diagonal path. Since light still travels at c, the longer path requires a longer interval. The transverse distance L is the same in both frames.
The light clock is a way to derive a general relation between time intervals. It applies to any ideal clock following the same path; it does not depend on the clock mechanism using light.
Diagram of half the pulse’s round trip, not to scale. The mirror separation L is perpendicular to the motion.
- Over half the round trip, light travels cΔt/2 in the laboratory while the mirror advances vΔt/2. These distances and L form a right triangle.
- Apply Pythagoras: (cΔt/2)² = L² + (vΔt/2)². Substitute cΔτ/2 for L and multiply through by 4.
- Rearrange: c²Δτ² = (c² − v²)Δt². Divide by c² and take the positive square root, since the intervals are positive.
Δτ = Δt × √(1 − v²/c²) = Δt × √(1 − β²)
Δt = γΔτ · Δτ = Δt/γ
What does the Lorentz factor mean?
The factor γ appears in Lorentz transformations, which relate space and time coordinates between inertial frames. In this comparison γ = Δt/Δτ. If γ = 2, the laboratory assigns 2 hours to a segment in which the moving clock records 1 hour. Its inverse, 1/γ, gives the proper time per unit of laboratory time.
At v = 0, γ = 1 and the intervals coincide. As v approaches c, γ increases without bound in the limit v → c. A material clock has no rest frame at speed c. At everyday speeds γ is very close to 1, so the effect is small.
In the initial example β = 0.8 gives γ ≈ 1.6667 and 1/γ = 0.6. Thus 60 laboratory minutes correspond to 36 proper minutes, a difference of 24 minutes. The clock accumulates 60% of the laboratory interval; γ does not mean a reduction of 1.6667%.
Which clock is really slower?
There is no privileged absolute rest. Each inertial observer can assign a slower rate to the other’s clock. They use different criteria for which distant clock readings are simultaneous. Swapping roles changes the event comparison: the two conclusions cannot be combined as though they used the same synchronisation.
Physical effect, perception and evidence
The clock works normally for someone accompanying it. The difference arises when relating measurements between frames, even after correcting signal travel time. A camera also records light delays and Doppler effects; its images are not what this animation’s two hands represent.
Chou and colleagues (2010) at NIST compared optical clocks and measured effects of slow motion and height differences. The latter involves gravity, outside this simulation. The reference provides the actual experiment for further study.
How to use
Choose speed as a fraction of c and the laboratory interval. Results update immediately. Click to animate: 12 screen seconds represent the entire selected interval. Pause or reset to compare.
How the calculation works
β represents v/c. The model calculates the rate √(1 − β²), multiplies the laboratory interval by that rate and obtains proper time. γ is the reciprocal rate. The drawings use a teaching scale; numbers express calculated intervals.
Worked example
At 0.8 c, √(1 − 0.64) = 0.6. For 1 laboratory hour, the moving clock records 0.6 hours, or 36 minutes. The difference is 24 minutes and γ is approximately 1.6667. At zero speed, the intervals are equal.
Limitations and precautions
A special-relativity model with uniform straight-line motion in an ideal inertial frame. It excludes gravity, acceleration, return trips and light-signal delays. The control stops at 0.99 c; a material clock cannot reach c in this model.
Frequently asked question
Does someone beside the clock feel time slowing down?
Their own clock continues to measure local time normally. The comparison concerns measurements assigned to the same events in different frames. The animated hands represent that calculated relationship, not what a camera would see.
What if the clocks meet again?
A round trip requires the full path, including changes in motion. This simulation describes only a constant-speed segment. Comparing ages at reunion requires calculating proper time along each path; extrapolating one segment does not solve the twin paradox.
To check the example’s time units, use Time converter.
Continue with How long does light take to travel? or read how the tools work.